ANSUL -NOVEC Products
ANSUL fire protection products were introduced to the marketplace in 1939 featuring the first cartridge-operated, dry chemical fire extinguisher.
FM-200 Gas Suppression System
Reactra Engineering Private Limited takes pride in being an authorized distributor and stockist of ANSUL – NOVEC Products, offering a comprehensive range of advanced fire suppression solutions. We specialize in the distribution of FM-200 Gas Suppression System, a highly effective and widely recognized solution for protecting critical assets.
We offer a complete range of FM-200 Gas Suppression Systems, including agent cylinders, control panels, detection systems, and discharge nozzles. Our systems are designed to meet the specific needs of your facility and provide reliable fire protection.
Cylinder
This section describes the individual components that comprise a complete system. Some items are optional depending on the application, and are indicated as such. The container assembly consists of a container fitted with a valve and internal syphon tube, factory filled with Novec™ 1230, and super pressurized with dry nitrogen to 25 bar @ 21 °C (360 psi @ 70 °F). Containers sharing the same manifold shall be equal in size and fill density. Containers are finished in red and are available
in various sizes. A nameplate is fixed to the container displaying the agent weight, tare weight, gross weight, fill density, charge date and fill location.
More About Products Details Given In The Data Sheet:
Container Valve
The FM-200 Gas Suppression System valve is a high-flow-rate device specially designed for use in fire systems. Operation is by means of a pressure-differential piston. Container pressure is used within the valve to create a positive force on the piston, sealing the valve closed. Operation of the valve occurs when the upper chamber is vented faster than the ‘make up device’ in the shuttle can replace the pressure. Thereby allowing, the shuttle to be forced up, and free flow of FM200 from the valve. Upper chamber pressure is released by the electrical, mechanical or pneumatic actuator.
The container valve is the result of extensive research and development and incorporates many unique safety features. The valve assembly is factory-fitted to the container and is supplied pre-assembled with a low pressure switch (to be ordered separately), pressure gauge and burst disc.
More About Products Details Given In The Data Sheet:
Burst Disc
A burst disc is factory fitted to every valve assembly. It is designed to rupture when the container becomes over pressurized when subjected to temperatures above the designed storage temperature of the container.
More About Products Details Given In The Data Sheet:
Lower Pressure Switch
A low pressure warning switch is fitted to every container and must be ordered separately. The device continuously monitors the container pressure and in the event of the pressure dropping below 20 bar (290 psi) the switch operates to enable the condition to be signaled to a control unit.
More About Products Details Given In The Data Sheet:
Electrical Actuators
The removable electrical actuator locates to the top of the container valve. 24 v dc is required for solenoid operation. Provision is made for the connection of a manual actuator to the top of the actuator assembly. Due to the design of the bridge rectifier it will operate regardless of how it is wired up; the positive supply from control panel can be connected to either terminal 1 or 2 with the reverse for the negative supply. The electrical actuator has a life span of 10 years from manufacture after which it must be replaced. The date of manufacture is indicated on the unit’s label.
More About Products Details Given In The Data Sheet:
Manual and Pneumatic Actuator
The manual actuator is used to mechanically operate the system at the container position and is fitted to the top of the valve assembly or removable electrical actuator. Inadvertent operation is prevented by a safety clip which has to be removed before activation.
Pneumatic Actuator
The pneumatic actuator is used to pneumatically operate the system at the container position and is fitted to the top of the valve assembly or removable electrical actuator. Pressure from a ‘master’ container is used to actuate the valve, via small bore piping or a flexible hose.
More About Products Details Given In The Data Sheet:
Discharge Hose
FM-200® container installations may be connected to the system by means of a flexible discharge hose. This enables containers to be disconnected for maintenance or recharge without dismantling other container mountings, manifold connections and pipework, etc. The flexible discharge hose is provided with a swivel fitting at the inlet.
More About Products Details Given In The Data Sheet:
Manifold Check Valve
Manifold check valves are of mushroom pattern type and lift into the manifold as discharge occurs. The function of the check valve is to prevent loss of extinguishing agent during discharge from an outlet, should a container have been removed. All check valves are ordered separately to the manifold assembly
More About Products Details Given In The Data Sheet:
Male Elbow
This elbow can be used on the last slave container when the pressure switch connection is taken from the manifold or piping networks.
More About Products Details Given In The Data Sheet:
Male Tee
This is used primarily in manifold systems for connecting pilot lines from one slave container to the next when using the pneumatic actuator.
Pressure Switch Connector
The pressure switch connector connects the pilot hose to the discharge pressure switch
More About Products Details Given In The Data Sheet:
Discharge Pressure Switch
The pressure switch is activated by pressure from the agent during discharge and can be used to signal to a control panel that the system has actually discharged. The pressure switch latches on operation and has a reset plunger.
More About Products Details Given In The Data Sheet:
Warning Sign
Door Notice
A door notice is required at each entrance to the risk to advise personnel that they are entering a protected area.
Manual Release Notice
A notice should be located at each manual release position.
More About Products Details Given In The Data Sheet:
IG541 – Inergen
The INERGEN iFLOW fire suppression system, manufactured by Johnson Controls, is an engineered clean agent system utilizing a fixed nozzle agent distribution network. The system should be designed and installed in accordance with the National Fire Protection Association (NFPA) Standard 2001, “Clean Agent Fire Extinguishing Systems.” INERGEN agent has also been tested by Factory Mutual (FM) for inerting mixtures of propane/air and methane/air in concentrations between 40% and 50%.
The system can be actuated automatically by an AUTOPULSE agent releasing control panel in addition to local and remote manual actuation as needed. Accessories can be installed to provide alarms, ventilation control, door closures, or equipment shutdown or other auxiliary functions. A system installation and maintenance manual is available containing information on system components and procedures concerning design, operation, inspection, maintenance, and
recharge. The system must be installed and serviced by authorized distributors trained by Johnson Controls.
More About Products Details Given In The Data Sheet:
Ready to enhance your FM-200 Gas Suppression System with ANSUL – NOVEC Products? Contact us today for inquiries, quotations Reactra Engineering Private Limited and benefit from reliable fire suppression solutions backed by expertise and quality.
OTHER ANSUL PRODUCTS
Our BRANDS
GET IN TOUCH
FOR GENERAL ENQUIRY
With over decades of experience, We have the techno commercial solution for every need of our customers.